Isithombe somkhiqizo
Izici zomkhiqizo
● Ifakwe ikhamera ye-pixel eyizigidi ezingu-20 kanye nelensi ye-telecentric ekabili enokukhulisa kabili, ikhwalithi yesithombe yinhle kakhulu;
● Idizayini ephezulu ye-telecentricity engaphansi kuka-0.02° iqinisekisa ukunemba kokulinganisa kwemikhiqizo enomehluko omkhulu wobude;
● Ukuhlanekezela kwe-TV okuphansi okungaphansi kuka-0.01% kanye nokufana kokuhlanekezela kuso sonke isithombe kuqinisekisa ukunemba kokuphindaphinda okuguquguqukayo kwesilinganiso;
● Idizayini yokukhulisa kabili inika amandla ukulinganisa okuphumelelayo ngenkundla enkulu yokubuka kanye nesilinganiso esinembayo esiphezulu esinokukhuliswa okuphezulu, okwanelisa izidingo ezimbili zamakhasimende zokusebenza kahle nokunemba;
● I-XYZ yokulawula ukunemba okuzenzakalelayo ngokugcwele kwe-XYZ iqinisekisa ukuma okunembile;
● Ukusetshenziswa kwesisekelo semabula yaseNdiya kanye nekholomu kunikeza ukuzinza okuhle;
● Iziqondiso eziqondile zomugqa, izikulufu zebhola eliphansi, ama-AC servo motors, njll., ziqinisekisa ukunemba nokuzinza kwesistimu yokunyakaza;
● Isikali somugqa esinembe kakhulu esingu-0.1μm siqinisekisa ukuma nokunemba kwesistimu;
● Ifakwe imithombo yokukhanya ehlukahlukene nomsebenzi wokuphakamisa ohlakaniphile ukuze ivumelane nezimo ezihlukahlukene zokulinganisa;
● Isofthiwe yokulinganisa i-Geomea enamandla nesebenziseka kalula ithuthukisa ukulawulwa kwekhwalithi;
● Izinhlelo zokulinganisa ezizenzakalelayo zingasethwa ukuze ziqedele izilinganiso zenqwaba ngempumelelo nangokushesha;
● Izinzwa zokukhanya ezimhlophe ezingathinteki ozikhethela zona zingasetshenziswa ukukala ukujiya, ukucaba, njll.
Isicelo
● Ingasetshenziswa ekulinganisweni okunembayo kwezinto ezinosayizi omkhulu
● Imboni ye-3C: izikrini zefoni ephathekayo, amakesi omakhalekhukhwini
● Imboni yezogesi: amabhodi e-PCB
● Amandla amasha: amabhethri e-lithium
● Imboni yezimoto: izingxenye ezinembayo
Imininingwane
| Impahla | I-Mobile Bridge Instant Vision Measuring System AutoFlash Series | ||||
| Imodeli | I-AutoFlash432 | I-AutoFlash542 | |||
| I-X/Y Axis Travel (mm) | (400*300)mm | (500*400)mm | |||
| Ubukhulu(WxDxH) | (1195*832*1579)mm | (1463*940*1591)mm | |||
| Usayizi Wokupakisha | (1380*1170*1910)mm | (1690*1300*2000)mm | |||
| Isisindo | 650Kg | 780Kg | |||
| I-Z Axis Trave (mm) | 200mm | ||||
| I-X/Y/Z-3 i-axis Linear Scales | Ukulungiswa Kwesikali Somugqa Kungenisiwe: 0.1um | ||||
| Imodi yokuqondisa | Umhlahlandlela oqondile womugqa, umhlahlandlela wesilayidi onethrekhi ekabili. | ||||
| Imodi yokusebenza | Isilawuli se-Joystick, ukusebenza kwegundane, uhlelo lokutholwa okuzenzakalelayo | ||||
| Layisha Amandla | ＜25Kg | ||||
| Indawo Yokusebenzela | Izinga lokushisa 20℃±2℃,Ibanga Lomswakama<2℃/h, Umswakamo 30~80%, Ukudlidliza<0.002g, <15Hz | ||||
| Ukunikezwa kwamandla kagesi | I-AC220V/50Hz;110V/60Hz | ||||
| Isofthiwe yokulinganisa | I-Geoma | ||||
| Ikhamera | 1'” 20Mpixel B/W Ikhamera | ||||
| I-Dual Telecentric Lens | I-Double Rate Dual Telecentric Lens | ||||
| Ukukhuliswa | 0.16X | 0.64X | |||
| Ukukala Isithombe | Ukuphindaphinda | Akukho Ukunyakaza | ±1μm | ±0.5μm | |
| Iyahamba | ±2μm | ±1.5μm | |||
| Ukunemba* | Ngaphandle Ukubopha | ±3.9μm | ±2μm | ||
| Iyabophezela | ±7μm | ±4μm | |||
| Ibanga lokusebenza | 145±2mm | 145±2mm | |||
| I-Telecentricity | ＜0.02° | ＜0.02° | |||
| Ukujula Kwenkundla | 6mm@25 lp/mm | 0.6mm@64 lp/mm | |||
| Inkambu yokubuka(mm)(D*H*V | 1” | 82*55*100 | 21*14*25 | ||
| 53*44*69 | 13*11*17 | ||||
| 2/3” | |||||
| Isixazululo | 20 um | 7.8 um | |||
| I-Illumination System | I-Contour | I-LED parallel contour illumination | |||
| Ubuso | 0~255 amazinga okukhanya kwe-LED alungisekayo ngokuqhubekayo | ||||
Incazelo Yemodeli Yokucushwa Komkhiqizo (Isibonelo nge-AutoFlash432)
| Isigaba somkhiqizo | 2.5D | 2.5D |
| Impahla | 2.5D Okuzenzakalelayo Umshini Wokukala Umbono | I-2.5D Automatic Laser-Scan & Vision Umshini Wokukala |
| Imodeli | I-AutoFlash432A | I-AutoFlash432C |
| Uhlobo | A | C |
| Ukubaluleka | Inzwa ye-Optical Zoom-lens | Inzwa ye-Zoom-lens kanye ne-Lazer Sensor |
| Xhumana ne-Probe | Ngaphandle | Ngaphandle |
| I-Lazer Module | Ngaphandle | Omron Lazer |
Amamodeli Nezicaciso Zesistimu Yokulinganisa Umbono Osheshayo
| Imodeli | Ikhodi# | Imodeli | Ikhodi# |
| I-AutoFlash432A | 503-120H | I-AutoFlash542A | 503-120J |
| I-AutoFlash432C | 503-320H | I-AutoFlash542C | 503-320J |
Ithebula Lomhlahlandlela Wesikhala Sokukala Okusheshayo Kombono
| Ukuhamba | Imodeli | I-X Axis Travel mm | I-Y Axis Travel mm | I-Z Axis Ukuhamba Okujwayelekile mm | I-Z Axis Maximum Custom Travel mm |
| 100X100X100 | IVS-111T | 100 | 100 | 100 | ------ |
| 250X150X150 | IVS-2515 | 250 | 150 | 200 | 300 |
| 300X200X200 | IVS-3020 | 300 | 200 | 200 | 400 |
| IVS-322A | 300 | 200 | 200 | 250 | |
| IVS-322C | 300 | 200 | 200 | 250 | |
| 400X300X200 | IVS-432A | 400 | 300 | 200 | 300 |
| IVS-432C | 400 | 300 | 200 | 300 | |
| 300X400X200 | I-AutoFlash432A | 400 | 300 | 200 | 400 |
| I-AutoFlash432C | 400 | 300 | 200 | 400 | |
| 400X500X200 | I-AutoFlash542A | 500 | 400 | 200 | 400 |
| I-AutoFlash542C | 500 | 400 | 200 | 400 |
Okunye ukucaciswa kohambo kungenziwa ngezifiso ngokuya ngezidingo zamakhasimende.
