Iimpawu zeMicroscope
● Uyilo oludibeneyo, olugqibeleleyo, ifashoni, isisa;
● Ikhamera edibeneyo eyakhelweyo kwi-high-definition ye-HDMI, eqhagamshelwe ngokuthe ngqo kwi-HDMI ukubonisa, inokuthatha imifanekiso okanye iividiyo;
● Ngenkcazo ephezulu ye-0.7 ~ 4.5X parallel qhubeka i-zoom lens, kulula kakhulu kwaye ngokukhawuleza ukutshintsha injongo yokukhulisa;
● Ngokukhanya kwe-LED ehlengahlengiswayo, iyakwazi ukulawula ukukhanya ngokuzimeleyo;
● Ngekhamera ye-2 ye-mega pixel autofocus, akukho mfuneko yokuchitha ixesha lokugxila kwi-manual rhoqo;
● Iiplatifti ezininzi ezikhethiweyo zokulawula iselula, qinisekisa ukuchaneka komlinganiselo wendawo;
● Ngomsebenzi wayo wokulinganisa, inokulinganisa imilinganiselo yomgca enjengomgama, iperimitha, indawo, iengile, iradian, ububanzi, umphakamo, kunye neradiyasi.
Isicelo seMicroscope
Ingasetyenziselwa ukuhlola okungenayo, ukuhlolwa kwemveliso, uphando lwezinto eziphathekayo, i-PCB kunye nohlalutyo lokuhlola lwe-SMT, ukuprinta, ukuhlolwa kwe-textile, i-biological anatomy, uvavanyo lwezonyango kunye nezinye iinkalo.
Inkcazo yobuGcisa
| Igama lemveliso | UJoliso oluzenzekelayo lweVidiyo yoMlinganiso weMikroskopu |
| Umzekelo | VM-500Plus |
| Ikhowudi# | #451-450P |
| Ukwandiswa kwe-Electronic | 32X-206X ( HDMI 16:9 24”Monitor) |
| Injongo yokubona | 0.7X~4.5X Ilensi yokwandisa |
| Umlinganiselo wokwandisa: 6.5:1 | |
| Isibuko se-adapter yekhamera ye-0.5X C-mount | |
| Iiparamitha zekhamera | 2MPixel (1920*1080) |
| Ubungakanani bomfanekiso:1/2.8” | |
| Izakhelo: 1080P@60fps | |
| Umsebenzi wokulinganisa | Imilinganiselo yomgca enjengomgama, iperimeter, indawo, i-engile, iradian, ububanzi, ubude, kunye neradiyasi izinto ziyalinganiswa. |
| Ukuchaneka koMlinganiselo | 0.02mm~0.003mm |
| Ukukhanyisa | UkuKhanya komphezulu we-LED okulungiswayo |
| Ukuma kweMicroscope | Uhambo lwe-Z-axis: 100mm |
| Iiparamitha zoMbane | AC90~240V/50~60HZ |
| Ubungakanani | 375*285*500 mm |
| Ubunzima | 6.5Kg |
Intshayelelo yeProjektha yeSoftwe
I-VM-500Plus inokulinganisa imigca ethe tye, i-engile, i-concentricizangqa, imigca enxuseneyo, umgama wokukhomba kumgca, inqaku nomgca ukuyaizangqa ezigxininisiweyo, i-diameter, i-circumference kunye ne-area, ubudekunye nobubanzi boxande, kwaye ingabala i-circumference kunyeindawo.Inokulinganisa ipholigoni kwaye ibale indawo yayo.Konkeingxelo yomlinganiselo ohambelanayo inokukhutshwa kwi-Uidiski.
Umlinganiselo weeSangqa eziPhambili
Umlinganiselo we-engile
Indawo yokuJonga
Indawo yokuJonga
| Ukwandiswa kwaMacho | Eyona ndawo isebenzayo yokujonga (X, Y, D: mm) | ||
| 0.7x | 17.76 | 10.03 | 20.40 |
| 1x | 11.16 | 6.3 | 12.82 |
| 2x | 5.42 | 3.06 | 6.22 |
| 3x | 3.63 | 2.05 | 4.17 |
| 4x | 2.7 | 1.52 | 3.10 |
| 4.5x | 2.47 | 1.4 | 2.84 |
Izincedisi ezisemgangathweni
| Igama lemveliso | Ikhowudi# | Igama lemveliso | Igama lemveliso | Igama lemveliso | Igama lemveliso |
| UMzimba oPhambili | VM-500Plus | intambo yamandla | 10A | imawusi engenazingcingo | Logi uphawu |
| Imonitha yeHD (uyazikhethela | 484-465 | Intambo yeHD | HDMI | U disk | 16G |
| Ikhadi lewaranti / iSatifikethi esifanelekileyo | VM-500Plus | Uluhlu lokupakisha | VM-500Plus | Imiyalelo | VM-500Plus |
Izincedisi ozikhethayo
| Igama lemveliso | Ikhowudi# | Igama lemveliso | Ikhowudi# |
| Itheyibhile yokulinganisa | 419-163 | 4-axis Mobile Platform | 419-170 |
| 0.5X Injongo eNcedisayo | 416-321 | 2X iNjongo eNcedisayo | 416-351 |
Indawo yokuJonga
| Ukwandiswa kwaMacho | Eyona ndawo isebenzayo yokujonga (X, Y, D: mm) | ||
| 0.7x | 17.76 | 10.03 | 20.40 |
| 1x | 11.16 | 6.3 | 12.82 |
| 2x | 5.42 | 3.06 | 6.22 |
| 3x | 3.63 | 2.05 | 4.17 |
| 4x | 2.7 | 1.52 | 3.10 |
| 4.5x | 2.47 | 1.4 | 2.84 |
Indawo yokuJonga
| Ukwandiswa kwaMacho | Eyona ndawo isebenzayo yokujonga (X, Y, D: mm) | ||
| 0.7x | 17.76 | 10.03 | 20.40 |
| 1x | 11.16 | 6.3 | 12.82 |
| 2x | 5.42 | 3.06 | 6.22 |
| 3x | 3.63 | 2.05 | 4.17 |
| 4x | 2.7 | 1.52 | 3.10 |
| 4.5x | 2.47 | 1.4 | 2.84 |
